 |
 |
Sensing and Datalogging for Science Education |
||
Sciencescope |
||||
|
Last updated 31st July 2008 Sensors Logbooks PriceLists Investigations 2008 Catalogue |
||||
| ||||||||||||
ROMs for the Logbook ML, UL, WL, GL and the HandyMeterReturn to Download Centre. All downloads require a password, please contact us for this. The metering functions of the ScienceScope devices use a Read Only Memory (ROM) to recognise the sensors they have attached, and then display the correct values and units for each type. As we develop new sensors, the ROM of older Logbook ML, UL, WL or GL and HandyMeters will need their ROMs upgrading to allow them to properly meter the new sensors. It is a relatively simple task to upgrade the ROM in your metering device using the Utility available below. Once it has been downloaded the application can be used repeatedly with subsequent ROM versions, so we recommend you do not delete the utility once downloaded. To reuse the ROM Upgrade Utility, read the instruction supplied with the Utility. The latest ROM binaries are available for download from the links below. Logbook ML, UL WL or GLs and HandyMeters are able to act as interfaces to Datadisc, as long as the version of Datadisc is able to recognise the new sensor. Remember that you can upgrade Datadisc to the current version, free of charge for current release Master licence holders, from the Download Centre. ROM Upgrade Utility DownloadThis is the location for downloading the installer for the ROM Upgrade Utility (version 1.2.12) , which is a 6.7 MB file called SetupScienceScopeROMUtility.exe Download If you cannot access 4shared.com please contact us, by email, and we will get this to you via another route. Latest ROM binary DownloadsNote that for all ROMs including or above version 115 for MLs, version 16 for UL and WL, or version 105 for Handymeter, you MUST use version 1.2.3 or higher of the ROMUpgradeUtility . The GL will only work with a ROMUpgradeUtility of version 1.2.7 or higher.
|
|
|
